language
| Quantity: | |
|---|---|
ATCK39-1024-3A
TERTRON
Description
This equipment(ATCK39-1024-3A) is specifically designed for the formation of electronic cigarette batteries under high-temperature conditions, enabling precise testing of battery capacity, lifespan, and charge-discharge performance. It significantly enhances the efficiency and accuracy of battery testing processes.
Key Features
- Tailored for E-cigarette batteries, ensuring compatibility with various sizes and chemistries.
- Uses a special clamp set for e-cigarette batteries, suitable for two-lead and single-lead batteries.
- Real-time detection and display of the status of each battery. If there is an abnormality, the channel will stop working and the indicator light will be on.
- It has a power-off protection function, and can continue to run the original workflow after a call.
- The power tube uses a field effect tube, which is suitable for batteries with lower voltage discharge, such as lithium iron phosphate batteries.
- The graphical operation interface is intuitive and clear. It displays the voltage, current, time, capacity and other data of each battery at the same time, and can set different colors to display the corresponding working status and abnormal conditions.
- The equipment accuracy is 0.05%, the data recording time is 1 second/time, and the stability is high.
- The software is powerful and the human-machine interface is friendly.
- The four-wire test interface ensures high measurement accuracy.
- Modular design concept, easy to maintain.
- The needle bed automatic equipment mode (can be used according to the turnover box design provided by the customer), one tray per layer, each tray loads 24 batteries, and a single row and double layers load a total of 48 batteries.
- According to actual measurements, the power consumption of this equipment during charging is more than 40% less than that of traditional equipment, the comprehensive power saving rate is more than 60%, and the power consumption is saved by more than 60%, which saves a lot of costs for battery manufacturers.
Product Parameters
| Structure Of Equipment | |||
Device Channel | 1024 channels | Overall Dimension | Length 1930mm× Width 1114mm× Height 2028mm |
Support Battery Specifications | Diameter: 8~18mm Length: 16~52mm | ||
Working Power Supply | Three-phase 5 wire system AC220V±10%,50HZ±5% | ||
| Working Power Consumption | ≤19.2KW | ||
| Heating power consumption | ≤4.8KW | ||
| Channel Parameters | |||
| Charging Voltage Range | DC 0mV~4.5V | Discharging Voltage Range | DC 2V~4.5V |
Constant Voltage Range | DC 2~4.5V | Voltage Measurement Range | DC 0V~5V |
Voltage Measurement Control Accuracy | ±(0.5‰ reading + 0.5‰ full scale) | Voltage Control/Sampling Resolution | 0.1mV |
| Charging/Discharging Current Range | 10mA~3A | ||
| Current Measurement Control Accuracy | ±(0.5‰ reading + 0.5‰ full scale) | Current Control/Sampling Resolution | 1mA |
| Time Measurement Control Accuracy | ≤±0.1% | ||
Heating Range | 20-70℃ (±3℃ adjustable) | ||
| Software Function | |||
Control Method | Computer control equipment operation, whole cabinet control, with scanning system | ||
Process Settings | A maximum of 64 step parameters and 256 cycles can be set | ||
Charging Mode | Constant current, constant voltage, constant current constant voltage/constant current, constant power, constant resistance | ||
Charging Cut-off Conditions | Voltage, current, time, capacity, -△V | ||
Discharge Mode | Constant current, constant voltage, constant current constant voltage/constant current, constant power, constant resistance | ||
Discharge Cut-off Conditions | voltage, time, capacity | ||
Protection Functions | Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, power failure protection, data breakpoint recovery | ||
Description
This equipment(ATCK39-1024-3A) is specifically designed for the formation of electronic cigarette batteries under high-temperature conditions, enabling precise testing of battery capacity, lifespan, and charge-discharge performance. It significantly enhances the efficiency and accuracy of battery testing processes.
Key Features
- Tailored for E-cigarette batteries, ensuring compatibility with various sizes and chemistries.
- Uses a special clamp set for e-cigarette batteries, suitable for two-lead and single-lead batteries.
- Real-time detection and display of the status of each battery. If there is an abnormality, the channel will stop working and the indicator light will be on.
- It has a power-off protection function, and can continue to run the original workflow after a call.
- The power tube uses a field effect tube, which is suitable for batteries with lower voltage discharge, such as lithium iron phosphate batteries.
- The graphical operation interface is intuitive and clear. It displays the voltage, current, time, capacity and other data of each battery at the same time, and can set different colors to display the corresponding working status and abnormal conditions.
- The equipment accuracy is 0.05%, the data recording time is 1 second/time, and the stability is high.
- The software is powerful and the human-machine interface is friendly.
- The four-wire test interface ensures high measurement accuracy.
- Modular design concept, easy to maintain.
- The needle bed automatic equipment mode (can be used according to the turnover box design provided by the customer), one tray per layer, each tray loads 24 batteries, and a single row and double layers load a total of 48 batteries.
- According to actual measurements, the power consumption of this equipment during charging is more than 40% less than that of traditional equipment, the comprehensive power saving rate is more than 60%, and the power consumption is saved by more than 60%, which saves a lot of costs for battery manufacturers.
Product Parameters
| Structure Of Equipment | |||
Device Channel | 1024 channels | Overall Dimension | Length 1930mm× Width 1114mm× Height 2028mm |
Support Battery Specifications | Diameter: 8~18mm Length: 16~52mm | ||
Working Power Supply | Three-phase 5 wire system AC220V±10%,50HZ±5% | ||
| Working Power Consumption | ≤19.2KW | ||
| Heating power consumption | ≤4.8KW | ||
| Channel Parameters | |||
| Charging Voltage Range | DC 0mV~4.5V | Discharging Voltage Range | DC 2V~4.5V |
Constant Voltage Range | DC 2~4.5V | Voltage Measurement Range | DC 0V~5V |
Voltage Measurement Control Accuracy | ±(0.5‰ reading + 0.5‰ full scale) | Voltage Control/Sampling Resolution | 0.1mV |
| Charging/Discharging Current Range | 10mA~3A | ||
| Current Measurement Control Accuracy | ±(0.5‰ reading + 0.5‰ full scale) | Current Control/Sampling Resolution | 1mA |
| Time Measurement Control Accuracy | ≤±0.1% | ||
Heating Range | 20-70℃ (±3℃ adjustable) | ||
| Software Function | |||
Control Method | Computer control equipment operation, whole cabinet control, with scanning system | ||
Process Settings | A maximum of 64 step parameters and 256 cycles can be set | ||
Charging Mode | Constant current, constant voltage, constant current constant voltage/constant current, constant power, constant resistance | ||
Charging Cut-off Conditions | Voltage, current, time, capacity, -△V | ||
Discharge Mode | Constant current, constant voltage, constant current constant voltage/constant current, constant power, constant resistance | ||
Discharge Cut-off Conditions | voltage, time, capacity | ||
Protection Functions | Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, power failure protection, data breakpoint recovery | ||
